设为首页|加入收藏

• 首 页
• 美军标 MIL
• 国际标准
• 协会标准
• 国内标准
• 论 坛

NF Z85-324-1-2000 数字局部交换V接口.支持网络通路的V5.1接口.第1部分:接口规范

上一篇: NF Z88-011-2000 电磁兼容性和射频频谱管理(ERM).海上移动业务运行的窄带直接打印NAVTEX接收器的电磁兼容性标准
下一篇: NF Z82-052-4-2000 综合业务数字网(ISDN).多用户号码(MSN)补充服务.数字用户信号发送系统第1号(DSS1)协议.第4部分:用户的抽象试验组和试验形式规范分部协议执行额外信息

Product Code:SAE J2337/2
Title:Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs With Iso 261 Threads and O-Rings Sealing - Part 2: Stud End Requirements, Dimensions, Design and Test Methods
Issuing Committee:Hydraulic Tube Fittings Committee
Scope: PurposeThis part of SAE J2337 specifies dimensions, design, and performance requirements for eight connectors using a conical seal to insure leak proof performance with a design factor of 4 to 1.Field of ApplicationThese connectors are intended for general and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These connectors are capable of providing leak proof full flow connections in hydraulic systems operating from 95 kPa vacuum to the working pressures shown in Table 1. Since many factors influence the pressure at which hydraulic systems will or will not perform satisfactorily, these values should not be construed as guaranteed minimums. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to ensure that the required performance levels are met.For use of these connectors in conditions outside the pressure and temperature limits specified, contact the manufacturer.
Rationale: PurposeThis part of SAE J2337 specifies dimensions, design, and performance requirements for eight connectors using a conical seal to insure leak proof performance with a design factor of 4 to 1.Field of ApplicationThese connectors are intended for general and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These connectors are capable of providing leak proof full flow connections in hydraulic systems operating from 95 kPa vacuum to the working pressures shown in Table 1. Since many factors influence the pressure at which hydraulic systems will or will not perform satisfactorily, these values should not be construed as guaranteed minimums. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to ensure that the required performance levels are met.For use of these connectors in conditions outside the pressure and temperature limits specified, contact the manufacturer.

标准名称：	圆筒式灯头的量规
中标分类：	电工 >> 电气照明 >> 灯具附件
替代情况：	被QB/T 2220-96代替
发布日期：
实施日期：	1995-01-01
首发日期：
作废日期：	1997-03-01
出版日期：

没有内容

没有内容

没有内容

没有内容

© 2009-2024 标准资料网 版权所有，并保留所有权利。

北京智聚科技有限公司 Tel: 010-67123753 E-mail: kefu@infoeach.com

京ICP备14017250号-1